The HDMI v1.4 4 In 1 Out Switcher - Wall Mountable is a high performance four HDMI input and one HDMI output switcher with digital audio inputs and outputs.
The Optical Audio Switcher 4 In 1 Out with Remote Control is the 2011 from our optical range of Audio converters/switchers. Designed to accept up to 4 digital audio streams via four TosLink input cables and by switch or remote control selection, it can direct the required digital audio stream to one TosLink output cable connected to your amplifier or active speaker. The device will work with audio formats PCM2, AC3/5.1, Dolby 5.1 & DTS 5.1 pass through.
The HDMI v1.4 Over Single CAT5e/CAT6 is a convenient way to extend a HDMI signal over a long distance. Instead of using expensive HDMI cables, this unit distributes the HDMI signal over a Cat5e/Cat6 cable. This high performance device supports HDMI v1.4 signals, including 3D content and 4k x 2k signal resolution, as well as 7.1CH, Dolby TrueHD, and DTS-HD audio support.
The 3D Mini HDMI Analyzer (CH-A1) is the complete tool for checking the compatibility of 3D sources and displays. It features touch sensitive controls with an OLED (Organic Light Emitting Diode) display that shows the input and output timings. The device interrogates the frame information of the input source (such as a Blu-Ray DVD) and the output sink (such as a HDTV) EDID data, ensuring the compatibility of both source and display for inter-working.
The HDMI v1.4 4 In 1 Out Switch with Coaxial Audio Out is designed for optimum use with HDMI v1.4 video and audio equipment. Full support for HDMI v1.4 features such as all 3D TV video formats, Audio Return Channel (ARC), Consumer Electronic Control (CEC 1.4) and all HDTV formats up to 1080p 12-bit Deep Colour. The device comes with EDID and HDCP Repeater functions in-built and digital audio formats supported for LPCM and Dolby with a separate coaxial audio output port for external sound systems.
The HDMI 1 In 8 Out Single CAT6 Splitter can distribute a single HDMI source to eight displays simultaneously, when connected with a CAT6 to HDMI receiver, by splitting and replicating the source signal.
The HDMI v1.4 4 In 2 Out Switch is a high performance device with 3D support. It allows up to four HDMI sources to be displayed on two HDMI display panels. Supports HDCP repeater functions and all standard 3D TV formats in addition to all HDTV formats up to 1080p 12-bit Deep Color. Supports PAL and NTSC video formats and includes remote control for easy operation.
The HDMI to Video Scan Converter is designed to convert a digital HDMI signal into an analog Composite Video output, with Left/Right stereo audio. The signal can be output in either PAL or NTSC format (switch selectable). The unit accepts a wide range of HDTV input resolutions from 480p to 720p@60Hz and PC from VGA to WXGA@60Hz. It will also work with DVI source and target using DVI to HDMI cable.
The USB/Optical to Analog Audio Converter is a simple device which is designed for Digital to Analog Audio conversion, as well as USB to Audio Conversion. The unit converts the digital input signal (USB/Optical), and outputs to your connected device via Left/Right analog connection. The converter can also output via Optical, allowing you to convert USB to Optical or bypass the Optical signal completely.
This HDMI to HDMI HQV Scaler (CHQV-2H) is designed for the Blu-ray DVD players, Digital TV, Cable and Satellite Set-Top Box (STB), Internet Digital Media Adapters, Audio-Video Receivers and Digital Recorders markets. It gives you the freedom to enjoy the full benefits of high resolution video by recreating a cinema like experience in the comfort of your home. This device is a worthy addition to any home entertainment system. In addition, the HD inputs have been improved, allowing this Scaler Box to deliver crisp, stunning and noise free full HD video.
The HDMI v1.3 3 in 1 out Switcher CLUX-31GAME is a high performance HDMI v1.3 switch with CEC and EDID bypass functionality, as well as HDCP 1.1 and DVI 1.0 compliance. Supports up to HD 1080p and PC WUXGA resolutions and digital audio like Dolby Digital TrueHD and DTS-HD is also supported. It allows for three (3) separate HDMI input devices to share one HDTV/Monitor. It allows you to easily switch between the three (3) HDMI inputs to select your desired HDMI source for display on the HDTV. DVI enabled devices are also supported using DVI/HDMI cable or adaptor.
The USB Over Ethernet Four Port Extender USB Hub - CETH-4USB is a multi functional USB HUB giving you three different modes of operation: A LAN Mode, an Extender Mode and a HUB Mode. The LAN (Local Area Network) Mode is useful for homes and offices with existing network infrastructure to allow users to access four USB devices. The Extender Mode is a convenient option to extend the operation distance of USB signal by up to 100 meters over a single CAT5/6 cable. In the HUB Mode (when no signal extension is needed) it becomes a 1-in-4-out USB HUB. All three modes support USB 1.1 and 2.0 protocols. USB 2.0 has a data rate of up to 480Mbps while 1.1 has only 12Mbps
The HDMI 1 by 16 splitter is capable of handling HDMI v1.3 and with support for Deep Color video and new lossless compressed digital audio. With extra features like EDID, this splitter is able to handle all your HDMI splitting needs. Supports DVI source and DVI display by using HDMI to/from DVI adaptor cable
The DisplayPort 1 In 4 Out Splitter allows a single DisplayPort input source to be displayed on four DisplayPort output monitors simultaneously. It supports video resolution up to 2560 x 1600 and audio up to PCM 7.1 The DisplayPort 1 In 4 Out Splitter provides a fast switch between source and display and saves EDID's reading sink time to allow image to display properly.
The HDMI to PC/Component Converter with Audio Box is designed to convert HDMI and DVI HD signals to Analog PC or Component SD/HD timings. It enables to convert HDMI sources to any analog PC timing for PC monitor, or Component YPbPr timing for Projector or TV. Simple switch operation selects the desired output mode of PC VGA or Component SD/HD to match the input signal format of HDMI PC or HD. The high bandwidth capability of the HDMI to PC/Component Converter with Audio Box supports a wide range of PC and HDTV resolutions and works with DVI source signals.
The 3G-SDI to HDMI Scaler with Audio - L/R and SPDIF is designed to convert SD-SDI (Standard Def-Serial Data Interface), HD-SDI (High Def-Serial Data Interface-Dual Link), and 3G-SDI (High Def-Serial Data Interface-Single Link) to a HDMI video format for display on any standard HDMI HDTV's. An SDI pass-thru port allows for an SDI monitor to be connected, as well. The input SDI signal type is auto-detected and correct conversion techniques applied. Audio is also transported, converted and presented as Left/Right audio for connection to an amplifier or speakers.
The Video Wall Controller Processor for Video Walls - with RS232 and VGA/HDMI Upscale is designed to maximize digital signage advertising, entertainment and interaction. Video Wall display modes include 2x2, 3x3, 3x2, 4x4, 4x3 and 5x5 LCD or PLASMA monitors at full HD HDMI 720p or 1080p. PC resolutions up to SXGA 1280*1024 are also accepted, converted and up-scaled to a digital 720p or 1080p signal for Video Wall display. Extremely versatile, easy to set up and use.
The HDMI v1.3 Over One CAT6 Transmitter is a convenient way to extend a HDMI signal over a long distance. Instead of using expensive HDMI cables, this unit distributes the HDMI signal over a CAT6 cable. Unlike similar HDMI Over CAT6 products which distribute the CAT6 Video and DDC data along two separate CAT6 connections, this unit distributes the Video and DDC Data along a single CAT6 Connection.
The HDMI v1.3 Over One CAT6 Receiver is a convenient way to extend a HDMI signal over a long distance. Instead of using expensive HDMI cables, this unit receives a HDMI signal over a CAT6 cable. Unlike similar products which distribute the CAT6 Video and DDC data along two separate CAT6 connections, this unit receives the Video and DDC Data along a single CAT6 Connection.
The HDMI to Video Scan Converter with Audio Output is designed to down-scale digital High Definition HDMI video to standard Interlaced Composite PAL or NTSC analog video and Left/Right audio output. Convert a HDMI digital video and audio stream to selectable analog PAL or NTSC 480i/576i and Left/Right audio for replay on any standard monitor.
The SDI to CV/SV Scaler with Audio allows SDI, HD, and 3G-SDI signals to display on CV/SV displays by allowing extension of an SDI source by distributing and extending SDI signals of high bit rates 2.970Gb/s, 2.970/1.001Gb/s, 1.485Gb/s, 1.485/1.001Gb/s and 270Mb/s over long transmission paths (3G-100m, SD-300m).
The SDI to PC/HD Scaler with Audio allows SDI, HD and 3G-SDI signals to be displayed on HD/PC displays. Ideal for professionals who work with HD/PC displays, this scaler automatically detects your SDI source while giving you high bit rates of 2.970Gb/s, 2.970/1.001Gb/s, 1.485Gb/s, 1.485/1.001Gb/s and 270Mb/s without signal loss, while also distributing and extending SDI signals over long ranges (3G-100m, HD-200m, SD-300m).
The HDMI to USB Capture Box is a High Definition capture box that takes your HD content and by using PC software, displays and records the 'captured' video signal. Ideal for older laptop and desktop computers that do not have a HD HDMI input port. The HDMI to USB Capture Box supports H.264/ MPEG 4 AVC (Advanced Video Coding) and resolutions from 720x480 to 1280x720 and 1920x1080.
The Coaxial/Optical to R/L Audio Converter -192kHz is an easy to use product that converts Coaxial or Optical audio signals into Left/Right audio, supporting S/PDIF LPCM 2CH @ 24 bits (for left and right channel) and a sample frequency of 44.1, 48, 96kHz up to 192KHz.
HD Audio Center
The HD Audio Center is an excellent device for converting digital and analog audio sources. This Audio device allows for the simultaneous conversion of digital audio input to analog audio output or analog audio input to digital audio output.
The 17 inch CGA EGA VGA LCD Desktop Monitor - Multi-Frequency easily allows you to connect CGA, EGA, and VGA video signals directly into the monitor via a 9pin to 15pin computer cable, or via our industrial RGB converter board. Plug and play solution for your older computer or industrial equipment.
The 19 inch CGA EGA VGA LCD Desktop Monitor - Multi-Frequency easily allows you to connect CGA, EGA, and VGA video signals directly into the monitor via 9pin to 15pin computer cable, or via our industrial RGB converter board. Plug and play solution for your older computer or industrial equipment.
The HDMI to 3G SDI Single Output Converter allows HDMI sources such as Blu-ray Players or game consoles to be displayed on an SDI display and is useful for applications including smart home entertainment, smart building or any smart AV installation system and film studio display.
The DisplayPort Extender Splitter 1 In 3 Out is a multi-taskers device, extending the signal from the display input for regeneration and splitting to three separate displays (which are SD compatible).
Digital S/PDIF and TosLink Audio over single Cat5e/6 Transmitter and Receiver is designed to transmit Optical and Coaxial digital audio signals up to 150 meters using one CAT5e/6 cable.
The HDMI to One CAT5e/CAT6 Cable with LAN/PoE/IR Receiver makes your home or office more efficient by sending an uncompressed video and audio HDMI signal, plus 3 Ethernet connections and Controls (through in-built RS-232 and IR ports), over a single CAT5e/CAT6 cable for a distance of up to 100m.
The HDMI to One CAT5e/CAT6 Cable with LAN/PoE/IR Transmitter makes your home or office more efficient by sending an uncompressed video and audio HDMI signal, plus 3 Ethernet connections and Controls (through in-built RS-232 and IR ports), over a single CAT5e/CAT6 cable for a distance of up to 100m.