IP Video over Internet Protocol Manager and Controller

  • 10th May, 2018

The IP VoIP Video Manager and Controller is a flexible solution for controlling multiple Video over IP (VoIP) Extenders all within the same network.

Install the IP VoIP Video Manager and Controller into the same local network as the Transmitter and Receiver Extender pair to easily configure channel routing selections by defining both unicast and multicast scenarios using WebGUI.

It is also possible to define and switch routes using customized groups, or presets, allowing for easy control over multiple video zones. Without the use of this centralized unit, each individual Transmitter and Receiver in the system would need to be controlled and configured directly through their own WebGUI.

Additionally, the IP VoIP Video Manager and Controller works by controlling the matrix and video wall modes of connected VoIP units. The settings of all connected Transmitter/Receiver units, including the IP address, the Netmask and the Extender status, are clearly displayed within the WebGUI. The WebGUI is easily accessed via a web browser over a normal network connection, or by directly connecting to the unit using an HDMI display with USB keyboard & mouse.

A trigger-input interface provides the easy addition of a remote control keypad, or other trigger-supporting products. These can be installed in a podium, or in a table in a conference room or classroom. The IP VoIP Video Manager and Controller interface can allow the user to activate stored presets with the simple press of a button. Standard control is available via WebGUI (remote or local), RS-232, Telnet and IR Remote.

If you need assistance with this product, then please feel free to contact us at anytime by Phone: +61 (0)2 4968 9313, by Fax: +61 (0)2 4968 9314 or by email: sales@converters.tv

We look forward to hearing from you.

icon image
Previous post
Digital/Analog Audio to Stereo
Next post
icon image
Scale HDMI and PC Video