New 1 In 2 Out UHD 4K2K Splitter Scaler with Audio De-Embedding is designed to upscale a HD 1080p signal to a UHD 6G 4K2K signal, or downscale a UHD 6G 4K2K signal to a HD 1080p signal, with synchronized digital and analog audio output.
New generation 1 Input 4 Output 4K2K HDMI 6G Splitter is an advanced solution for splitting and distributing a single HDMI signal simultaneously to 2, 4, 8 or 10 HDMI outputs. Apart from providing support for UHD video, up to 4K2K@60Hz (YUV444) resolution, it also supports audio pass-through of high resolution digital formats such as LPCM7.1CH, Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio and Dolby Atmos with sampling rates up to 192kHz.
1 x 2 DVI Splitter
1 x 2 DVI Splitter DA distribution amplifier is designed to split a DVI signal to two DVI monitors without signal loss or degredation. Connect your DVD player, PC or Game Console to display to two separate screens. Supports PC resolutions VGA up to WUXGA and HD resolutions 480p up to 1080i/p (not 480i/576i). Ideal for shop signage displays and video distribution between and around large rooms or buildings.
​The 1 x 2 UHD 4K HDMI Splitter is the advanced solution for splitting and distributing an HDMI 4K UHD signal equally across 2 HDMI outputs. It delivers high performance video output, without signal loss or degradation, up to 4K@60Hz (YUV 4:2:0) in resolution.
The new 1 x 4 UHD 4K HDMI Splitter is an advanced solution for splitting and distributing a single HDMI video and audio stream into 4 equal HDMI video and audio outputs.
1 x 8 HDMI Splitter
1 x 8 HDMI 1.3 Splitter allows you to split a single HDMI source to eight outputs, without signal loss or deterioration. Connect your DVD player, PC or Game Console to display to eight separate screens. Supports PC resolution up to UXGA and HD up to 1080p. Ideal for shop signage displays and video distribution between and around large rooms or buildings.
The 1080i Digital Photo and Music Media Player is a standalone device which allows you to view photos on your TV directly or listen to music from a memory card or USB device. The 1080i Digital Photo and Music Media Player can output these to a large size display with a resolution of up to 1080i.
The 3D HDMI 1 In 2 Out Splitter with audio is fully compliant with HDMI v1.3. It allows the output from any HDMI equipped device, such as a 3D DVD or Blu-ray Player, to be split equally and connected to two HDMI displays, such as a HDTV or a HD projector in the same room. The third HDMI output is an audio with blue screen output, which means it can be connected to an AV Receiver that does not support 3D signal.
The 3D Mini HDMI Analyzer (CH-A1) is the complete tool for checking the compatibility of 3D sources and displays. It features touch sensitive controls with an OLED (Organic Light Emitting Diode) display that shows the input and output timings. The device interrogates the frame information of the input source (such as a Blu-Ray DVD) and the output sink (such as a HDTV) EDID data, ensuring the compatibility of both source and display for inter-working.
The 3G SDI to HDMI Converter allows SD-SDI, HD-SDI and 3G-SDI signals to be shown on HDMI/SDI displays while ensuring high bit rates of 2.970 Gbit/s to give you fast signal transmission without any loss. For professionals this means that it is now easier to distribute and extend your 3G SDI signal while giving you the ability to display your work on HDMI displays thanks to the built in HDMI converter. Furthermore, thanks to the loop-through 3G-SDI design, users are able to enjoy both SDI and HDMI displays at the same time.
The 3G-SDI to HDMI Scaler with Audio - L/R and SPDIF is designed to convert SD-SDI (Standard Def-Serial Data Interface), HD-SDI (High Def-Serial Data Interface-Dual Link), and 3G-SDI (High Def-Serial Data Interface-Single Link) to a HDMI video format for display on any standard HDMI HDTV's. An SDI pass-thru port allows for an SDI monitor to be connected, as well. The input SDI signal type is auto-detected and correct conversion techniques applied. Audio is also transported, converted and presented as Left/Right audio for connection to an amplifier or speakers.
The new 4K2K HDMI Analyser and Enhancer is a tool designed for analysing HDMI HD and UHD 4K2K 6G video and audio signals. It can indicate the Bandwidth and HDCP details and allows for EDID and YUV420 selections. It can extend the signal up to a distance of ten metres and also allows users to upload EDID settings to a PC application, which can then be used to create alternative EDID settings for other specific uses. With direct selection keys for easy switching between modes and status LEDs which allow at-a-glance viewing of the device's status, the 4K2K HDMI Enhancer is a perfect tool for all professional Installers.
4k2k HDMI EDID Emulator is designed to allow adjustment of an HDMI or DVI display's EDID (Extended Display Identification Data) information. This is the information provided to the source device (eg DVD player or Set Top Box) so that the best video and audio signal can be automatically selected for display. It also supports EDID Emulation and By-pass Modes.
The 720p Digital Multimedia Player handles display and playback of digital media including photos, music and movies, and can output these to a large size display with a resolution of up to 720p. The unit functions as a standalone device, allowing you to view content from a connected USB device or memory card.
The Analog L/R to Digital Audio Converter is designed to convert an Analog stereo audio signal from L/R input to Digital Coaxial SPDIF and TOSLink Optical outputs and works as a converter and/or splitter, allowing you to use one output or both at the same time.
AV Stereo Selector CVD-1000. This switchbox allows the user to select one out of the four input A/V sources. The selected source is then amplified and split into four parallel outputs.
The CAT6 to HDMI v1.3 Receiver is designed to allow you to extend a HDMI signal over a long distance. Instead of using expensive HDMI cables, this unit distributes the signal over a CAT6 cable. When used with an appropriate HDMI to CAT6 Transmitter unit, the Input/Output source can run up to 45 meters (1080p/8 bits).
The HDMI v1.3 to CAT6 Transmitter is designed to allow you to extend a HDMI signal over a long distance. Instead of using expensive HDMI cables, this unit distributes the signal over a CAT6 cable. When used with an appropriate CAT6 to HDMI Receiver unit, the Input/Output source can run up to 45 meters (1080p/8 bits).
Coaxial to CO-AX 2 Toslink two way converter designed to accept an S/PDIF audio input through either Coaxial cable or Toslink cable, and passes the signal (as is) to both the Coaxial and Toslink output ports. The unit has a built in amplification feature which makes it suitable to use as a Toslink or Coaxial audio signal repeater.
Coaxial HDMI Transmitter and Receiver Box for the transmission of HDMI Full HD over Coaxial cable, for up to 100 metres distance. Features support full HDMI v1.3 1080p 12bit Colour transmission, support Deep Colour, in-built CEC technology, support for HD Audio up to 7.1 Surround (8 channel audio). Transmission format ensures no delay or loss of Video and Audio signals over long distance and no software required for operation.
The Coaxial/Optical to R/L Audio Converter -192kHz is an easy to use product that converts Coaxial or Optical audio signals into Left/Right audio, supporting S/PDIF LPCM 2CH @ 24 bits (for left and right channel) and a sample frequency of 44.1, 48, 96kHz up to 192KHz.
The Component and PC to Composite Video Scan Converter is designed to down scale Component and PC VGA signals to an analog Composite Video NTSC or PAL signal. Supporting Standard Def and High Def Component inputs from 480i/p to 1080i/p, and PC resolutions of VGA up to WUXGA@60hz, this scan converter scales down to either Standard Def PAL or NTSC video for CV (yellow plug) connection to SDTV's.
This Component to RGB Converter enables you to view your HDTV programs or high res video games on your PC Monitor. Since the output signal timing is exactly the same as the input singal timing, no pixel re-scaling needs to occur.
The Component to RGBHV Converter (CYU-343) will convert YCbCr 480i/576i (15Khz) and YPbPr 480p/576p (31Khz) to RGBHV for connection to a VGA monitor.
Component Video to HDMI Converter plus Audio with analog/digital Audio conversion capability. The Component Video to HDMI Converter plus Audio allows conversion of Component Y/CbCr/PbPr video signals from a DVD player, Set-Top Box or Multimedia player to be displayed on HDTV displays.
Digital Optical Audio Switcher designed for the signal selection from two digital optical inputs to one input, using Toslink (optical fiber) cables.
Digital S/PDIF and TosLink Audio over single Cat5e/6 Transmitter and Receiver is designed to transmit Optical and Coaxial digital audio signals up to 150 meters using one CAT5e/6 cable.
The Digital to Analog Two Way Audio Converter allows you to convert an Analog 2CH Left/Right audio signal into a Digital audio signal, or change Digital TOSlink or Coaxial audio signals into an Analog 2CH L/R audio signal.
The DisplayPort 1 In 4 Out Splitter allows a single DisplayPort input source to be displayed on four DisplayPort output monitors simultaneously. It supports video resolution up to 2560 x 1600 and audio up to PCM 7.1 The DisplayPort 1 In 4 Out Splitter provides a fast switch between source and display and saves EDID's reading sink time to allow image to display properly.
The DisplayPort Extender Splitter 1 In 3 Out is a multi-taskers device, extending the signal from the display input for regeneration and splitting to three separate displays (which are SD compatible).
​The Display Port to HDMI Converter provides digital signal conversion from DisplayPort to HDMI interface, utilizing ‘DisplayPort to HDMI Level Shifter' technology.
A professional DVI Digital scaler with ultra high bandwidth Scaler. For PC, Component, DVI to DVI. This model can handle input and output signals upto 205MHz. It accepts both analog and digital input and outputs a variety of scaled DVI resolutions.